What’s your store size?*
*For a more accurate estimation of Newton Gateways per store area, you can contact our sales executives here
“With Newton Gateways, your business can easily connect to the Point-of-Sale system. You will be able to deliver dynamic sales and promotional activities to customers at the shelf in an instant. In due course, you will notice that the time and cost savings have helped improve your bottom line.”
Steve Jun
Business Development Manager
Antenna Type
Fantasy Band
(Tx, Rx)
Antenna Gain
Antenna Type
Fantasy Band
(Tx, Rx)
Antenna Gain
Interested in what benefits you'll gain?
Check our ROI calculator
Newton Gateways make “in the blink of an eye” a redundant concept. Three thousand tags can be updated within 5 minutes with a single Newton Gateway.
1GB
RAM
10 W
Power consumption
Ethernet
Interface
50,000
Label capacity
30m/98ft
Communication coverage
4GB
Flash memory
Getting the Green Light.
Newton Gateway is equipped with an LED signal system conveniently located on the Gateway face. The LED indicators are responsible for communicating the Gateway operational status, and each LED delivers a different message.
* Currently, Newton Gateway only operates at 2.4GHz
ON if Ethernet is connected. Gateway checks every 1 second whether Ethernet link is connected.
Blinks (1 sec duration) if the Server Interface layer is operational. Gateway checks the operation of the Server Interface layer.
Blinks (3 sec duration) if the RF Modem is operational. Gateway checks the operation of the RF Modem layer.
Blinks (1 sec duration) if the Server Interface layer is operational. Gateway checks the operation of the Server interface layer.
Blinks (wakeup order duration) if the RF Modem is operational. Gateway checks the operation of the RF Modem layer.
For optimum performance of the Newton System, there’s a simple way to calculate how many Gateways are needed depending on the store area.
*Overlap refers to the intersection between the coverage of multiple Gateways to ensure that all ESLs are covered.
Compared to Zigbee protocol which has about 11~16 available RF channel, Newton Protocol has about over 80 available RF channel which gives much easier CH setting environment.
Newton Auto Channel Selection function gives a CH hopping capability when there is a collision between unexpected WIFI interference to make sure the CH for Newton Gateway is always on the clean/free CH.